New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Riverside pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Patio Door Installation Across Mentone
Patio door installation in Mentone typically runs $1,400 – $3,800 for a standard sliding door, and $2,600 – $6,500 when an older home needs reframing to meet current code. Most jobs take one to two days once materials arrive. If you live in a pre-1970s Mentone house, the single biggest factor in your quote is whether the existing rough opening is square, sized correctly, and free of rot behind the stucco. We’re the windows-and-doors specialist within the Garrison Partners network, and we serve Mentone from our Inland Empire office at (831) 217-8612. Call for a free estimate. The price goes on paper before work starts, and it does not move at the door.
Why Meridian Windows and Doors Riverside Is Mentone’s Preferred Patio Door Installation Company
A meridian is a fixed line you measure everything against. That’s what the name means, and how we run every install. Our crews work Mentone regularly, from the ranch homes off Crafton Avenue to the newer lots near the Crafton Hills. Elliot Vance, who leads the team, holds every job to The Garrison Standard: written pricing, background-checked uniformed technicians, and a 365-Day Done Right Promise in writing on every contract. If the work fails within that year, we come back at no charge.
What does that mean for a Mentone homeowner? Your quote accounts for the things that actually happen when we open a 1950s wall: undersized rough openings, rotted bottom plates, failed waterproofing, flex in hollow-core doorframes. We’re not guessing. We plan for it, write allowances into the contract, and any surprise gets priced and approved in writing before we touch it. Our team is authorized to install and replace products from PGT, CGI, CWS, and ViewLux, among eight manufacturer lines. That means the right door gets spec’d for your house, not the one sitting in a warehouse.
Sliding Door Installation in Mentone
Sliding door installation is the most common patio door job we perform in Mentone, and in older homes it rarely stays simple. The existing opening on many early-20th-century Craftsman bungalows and postwar tract houses was framed for a thinner, lighter door than anything built today. Modern impact-rated sliders from PGT or CGI require a deeper, sturdier rough opening. Once demo exposes the framing, we often find the king studs are undersized or the header isn’t carrying the load the way it should. That’s a reframe, not a swap.
Reframing and Code-Compliant Openings
Current California building code sets minimum design pressure ratings and rough opening dimensions for exterior patio doors. A 1960s wood slider in Mentone almost never meets those numbers. We reframe to code, pull the permit, and coordinate the structural inspection. The allowance for this work is written into your contract before demo starts, so the number you approved is the number you pay.
Impact-Rated Glazing for Mentone Heat and Wind
Mentone summers run hot, often above 100°F, and the Santa Ana winds expose every gap in an old door. Impact-rated insulated glass units from PGT or CGI do two things: they hold their rating when debris hits, and they cut heat transfer through the glass. Low-E coating (a thin layer that reflects heat while letting light through) keeps the southern exposure on a ranch-style home from turning the living room into a kiln.
Patio Door Repair in Mentone
Patio door repair in Mentone usually costs between $180 and $650 for track and roller work, and $400 to $1,500 when water damage has rotted the sill or bottom plate. The older the home, the more likely the problem is structural rather than mechanical. A door that sticks or jumps the rail on a 1950s ranch is often not a hardware problem at all. It’s the frame flexing, or the sill settling, or water getting where it shouldn’t.
Track, Roller, and Jamb Repairs
When a slider binds or grinds, we replace the rollers, clean and realign the track, and check the jamb for rot. On a recent job near Mentone’s Crafton Hills, our tech found a sliding patio door where the original jamb had rotted behind the stucco and the design pressure was so low you could rattle the sash with one hand. We installed a PGT impact-rated sliding door with an insulated glass unit and new king studs. The homeowner now opens it without a wrestling match.
Water Damage and Failed Waterproofing
Failed waterproofing around the original door pan rots the bottom plate and sill, letting water track under the floor before the old door shows any visible leak. We remove the door, cut out the rotted framing, treat the area, and install a proper pan with new flashing. This is the repair that turns into a full Patio Door Installation when the damage runs deep.
Trusted Brands We Service in Mentone
We’re authorized to install and replace products from PGT, CGI, CWS, and ViewLux, among our full portfolio of eight manufacturer lines. That matters in Mentone because impact ratings and thermal performance vary by brand and by product line. A PGT impact slider handles wind pressure differently than a ViewLux aluminum door, and the right pick depends on your home’s exposure to the Santa Ana pattern and the direction your wall faces. We stock common hardware and track parts for the brands we carry, which shortens repair timelines for Mentone customers. You won’t wait weeks for a roller assembly because the part is backordered from a distributor on the coast.
Common Patio Door Installation Problems We See in Mentone Homes
- Undersized rough openings. Mentone’s pre-1970s homes often have exterior walls framed around non-standard rough openings. Today’s impact-rated doors need more depth and width than the original opening provides, so full reframing is the norm once demo exposes the framing.
- Hollow-core doorframes that flex. Hollow-core frames from the 1960s flex under Santa Ana winds, causing the running track to bind and the panel to jump the rail. Replacing the door without addressing the frame means the new hardware fails the same way.
- Failed waterproofing at the door pan. The original pan under a 1950s or 1960s slider is often broken, corroded, or missing entirely. Water tracks under the floor long before the old door shows visible damage.
- Single-pane glazing and heat gain. Many Mentone ranch homes still have single-pane glass in their patio doors. The west-facing wall of a house near Mentone Boulevard can make a living room uninhabitable from June through September. Insulated, low-E glass is the fix.
Pricing for Patio Door Installation in Mentone, CA
A standard sliding patio door replacement in Mentone runs $1,400 – $3,800 installed for a mid-line product. Impact-rated doors from PGT or CGI start around $2,600 and run to $6,500 installed when the job includes reframing, new flashing, stucco repair, and permit coordination. A basic patio door repair, like roller and track work, costs $180 – $650. If the opening needs reframing to meet code, add $800 – $2,200 depending on what demo exposes. You’ll get a written, line-item price before any work starts. It does not change at the door. Call (831) 217-8612 to schedule a free estimate.
We Also Serve Cities Near Mentone
Meridian Windows and Doors Riverside serves homeowners throughout Mentone and the surrounding Inland Empire communities. If you’re in Yucaipa, Loma Linda, Colton, or Riverside, our crews cover those areas too. Same written pricing, same 365-Day Done Right Promise, same live person answering the phone when you call.
Serving Mentone, CA - Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Patio Door Installation in Mentone
Yes, in nearly every case. Replacing an exterior patio door in Mentone triggers a building permit when the opening changes size or the framing is altered. On pre-1970s homes, the existing rough opening rarely meets current code, so a structural inspection is part of the job. We pull the permit and coordinate the inspection. Call (831) 217-8612 and we’ll tell you exactly what applies to your address before you sign anything.
We reframe the opening to the size and structural standard the new door requires. Rotted bottom plates get cut out and replaced with pressure-treated lumber. Oversized openings get packed down with new king studs, a proper header, and new sheathing. This work is written into the contract as an allowance before demo starts, so you know the number and we approve any surprise in writing before touching it.
Impact-rated insulated glass units cut heat transfer through the glass, which matters when Mentone temperatures run above 100°F in summer. The laminated interlayer in impact glass also damps sound transmission. A patio door facing a street with morning traffic gets quieter, and the low-E coating lowers cooling load on the room. The effect is measurable, not marketing. Expect a noticeable difference in the first afternoon the sun hits that wall.
Yes. We can spec a patio door from the same manufacturer and product family as your new impact windows, so the sightlines and finish match. If you’re replacing jalousie windows with PGT impact windows, we’d generally pair them with a PGT sliding door. The frames, glazing, and hardware carry the same design language, and the door gets the same design pressure rating as the windows. That matters when the whole wall faces the Santa Ana pattern.
We remove the old door, track, and frame debris from your property and handle disposal. Glass, aluminum, and wood get recycled where local facilities accept them, and the rest goes to a licensed disposal site. You don’t haul anything, and we don’t leave a single-pane door leaning against your fence for a week. It’s gone the day we finish.
Written by Elliot Vance, Owner at Meridian Windows and Doors Riverside, serving Mentone and the surrounding Inland Empire communities.
Six Reasons Homeowners Choose Meridian Windows and Doors Riverside
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.