New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Riverside pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Awning & Hopper Windows in Riverside, CA
Awning windows are hinged at the top and open outward from the bottom, so you can leave them cracked open during a light rain without water coming in. Hopper windows flip that design: hinged at the bottom, opening inward from the top, which makes them a natural fit for basement egress or tight spaces like bathrooms and laundry rooms. Both styles are compact, practical, and built for ventilation when sliding or double-hung windows won’t do the job. Meridian Windows and Doors Riverside installs and replaces both, and if you’re already exploring broader Window Installation in Riverside, this page covers the specifics of these two hinged styles.
Most awning window replacements in Riverside run between $450 and $950 per window installed, depending on size, frame material, and glass package. Hopper windows typically come in a little lower, around $350 to $750 installed, because they tend to be smaller and simpler to frame. Those are real numbers from our own job history in Riverside, not a national average pulled from a search result. Call (831) 217-8612 and we’ll put a written price in front of you before any work starts.
Key Takeaways
- Awning windows hinge at the top and open outward; hopper windows hinge at the bottom and open inward.
- Both styles work well in wet climates like Riverside’s winter months because the sash acts as a natural rain shield when open.
- Replacement pricing in Riverside typically runs $350 to $950 per window installed, depending on style, size, and glass.
- Every install is covered by our 365-Day Done Right Promise, in writing, with no labor exclusion fine print.
- We stock products from eight manufacturer lines, including PGT, CGI, and CWS, so the right window gets spec’d for the job.
When You Need Awning & Hopper Windows
These aren’t the windows most people think about first. They’re the ones you realize you need after living with a problem for a while. Here’s what that problem usually looks like in Riverside:
- You want fresh air during light rain. Awning windows can stay open without letting water in, something a standard slider or double-hung can’t do. In a city that gets occasional showers between long dry stretches, that matters more than you’d think.
- You have a basement or below-grade window opening. Hopper windows are the standard choice for basement openings in Riverside homes because they open inward, which means exterior window wells don’t block operation.
- You’re tired of fighting a crank window that binds or won’t seal. Old awning windows with worn gear mechanisms eventually stop closing tight. Once the seal goes, so does your cooling efficiency during Riverside summers that routinely hit 95 degrees or more.
- You need a window in a hard-to-reach spot. Awning windows work well above counters, sinks, and other places where you’d have to stretch to operate a sliding sash.
- You’re upgrading a laundry room, bathroom, or utility room. These spaces need ventilation and privacy, not a big picture window. Both awning and hopper styles come in compact sizes that fit the bill.
- Your current window is original to a 1970s or 1980s Riverside build. That aluminum frame has outlived its useful thermal life. We see this all over the Arlington, Victoria, and Magnolia Center neighborhoods.
If any of that sounds familiar, the fix is straightforward. We measure, we spec the right product from our window installation line-up, and we install it on the schedule we agreed to. No surprises at the door.
Our Awning & Hopper Windows Process
We run every install the same way, whether it’s one hopper window in a basement or a full exterior replacement. The process is written down, and you get the written price before we touch a single screw.
- You call and talk to a live person. Someone answers at (831) 217-8612 every hour of every day. You tell us what you’re dealing with, and we schedule a site visit.
- We measure and talk through options. The technician checks the rough opening, looks at the surrounding trim and framing, and discusses frame material, glass package, and which manufacturer line fits the job. We pull from PGT, CGI, CWS, and five other lines, so the decision is based on your house, not our inventory.
- You get the price in writing. Before any work is scheduled, you have a written quote with the full scope, the specific product, and the total number. That number does not move at the door.
- We install on the agreed day. The crew shows up in uniform, background-checked, and on time. We remove the old window, prep the opening, set and level the new frame, and seal it properly.
- We walk the job with you before we leave. You see the finished install, we check the operation of the window together, and we clean up the work area. The sill is not left with caulk smeared across it.
- You’re covered for 365 days, in writing. If anything fails within that year, we come back and fix it at no charge. That’s the Done Right Promise, and it’s printed on every job.
A meridian is a fixed line you measure everything against. That’s what the name means and how we run every install. The Garrison Code, the standard we operate under, is specific about what the crew will and will not do on a job site: no shortcuts on flashing, no reusing rotted trim, no leaving debris in the yard. You can hold us to it.
Awning & Hopper Windows Pricing in Riverside
Here’s what we actually see on Riverside jobs, not what a national estimator website guesses. Awning windows run $450 to $950 per window installed. Hopper windows run $350 to $750 installed. The spread comes down to a few specific factors:
- Size of the rough opening. A small bathroom hopper is at the low end. A wide awning window over a kitchen sink is at the high end.
- Frame material. Vinyl is the most common choice for Riverside homes and lands in the middle of the range. Aluminum is lighter but thermally weaker. Wood or wood-clad frames push toward the top of the range.
- Glass package. Low-E glass (a thin coating that reflects heat while letting light through) adds cost but cuts cooling load meaningfully in a Riverside summer. Dual-pane with argon fill is standard on most jobs we quote.
- Condition of the existing opening. If there’s water damage or rotted framing behind the old window, that repair work is quoted separately and shown on the written estimate before we start.
- Which manufacturer line we spec. PGT and CGI products carry different price points than our more budget-conscious lines. We’ll show you the difference and let you choose.
Every estimate is free. You’ll get the full line-item breakdown and a number that doesn’t change unless the scope changes and you approve it in writing first. Call (831) 217-8612 to schedule a measurement.
Awning & Hopper Windows: What to Know Before You Choose
Frame material matters more than you think in Riverside heat
Riverside’s summer temperatures regularly push into the high 90s and low 100s, and the sun doesn’t quit. Vinyl frames with welded corners hold up well here and don’t conduct heat the way old aluminum frames do. If you’re replacing single-pane aluminum awning windows from the 80s or 90s, going to vinyl dual-pane cuts heat transfer noticeably. We quote vinyl more than anything else in Riverside for good reason.
Hardware quality varies by manufacturer
The crank mechanism on an awning window and the hinge system on a hopper window are the moving parts that fail first. Cheaper hardware gets stiff, strips, or snaps within a few years of regular use. The lines we carry, including CWS and ViewLux, use multi-point locking hardware that holds the sash tight against the weatherstripping. That’s the difference between a window that seals on day one and a window that still seals on day 800.
Awning windows can double as egress in some cases
Building code requires egress windows in bedrooms, and not every awning window meets the minimum opening size. If you’re replacing a bedroom window, we’ll verify the egress dimensions against the current Riverside code requirements before we order anything. Hopper windows are rarely used for egress because they open inward, which reduces the clear opening.
Water drainage is built into the design
Bay & Bow Windows aside, awning windows are naturally better at keeping rain out because the sash overlaps the frame when closed, and when open, the sash itself acts as a roof over the opening. That’s why they’re so common in coastal climates from the factory to the Pacific Northwest. Hopper windows rely on the same overlapping principle, just reversed. Both styles use a sloped sill and weep holes to channel any water that does get past the seal back outside.
Riverside Homes We’ve Worked On
Most of the homes we service in Riverside were built between the 1950s and the early 2000s. The older stock, especially in Wood Streets and the areas around Victoria Avenue, often has original wood-frame windows that have been painted over so many times the operation is compromised. The newer construction in Orangecrest and Mission Grove tends to have builder-grade aluminum or vinyl, or sometimes garden windows, that’s now hitting the 20-year mark and losing its seal. That’s where we come in.
We’ve replaced casement windows and awning windows in Riverside kitchens where the crank had already been replaced once and was failing again. We’ve installed hopper windows in basements that hadn’t had working ventilation in a decade. The pattern is usually the same: the homeowner has been living with the problem, assuming replacement would be disruptive and expensive, and the actual job ends up taking less than a day per window.
FAQs – Awning & Hopper Windows
How much does an awning window cost in Riverside?
An awning window replacement in Riverside typically costs $450 to $950 per window installed. The final number depends on the size, frame material, glass package, and condition of the existing opening. Call (831) 217-8612 for an exact quote, estimates are free.
Can you install awning or hopper windows the same day?
In most cases we can install within a week of measurement, and single-window jobs may be completed in under half a day once we’re on site. Same-day installation is available when the product is in stock and the opening doesn’t require structural repair. Call (831) 217-8612 to check current availability.
Is it cheaper to repair or replace a failing awning window?
If the problem is a broken crank mechanism, a repair usually makes sense and costs between $90 and $220 for parts and labor. If the frame is warped, the glass seal has failed, or the window is more than 20 years old, replacement is often the better long-term value. We’ll give you a straight answer either way, and the written quote shows both options when they apply.
Are awning windows good for Riverside’s climate?
Yes. Awning windows perform well in Riverside because they seal tightly against the heat while allowing ventilation during cooler evenings and light rain. With dual-pane low-E glass, they reduce the cooling load on homes that deal with 90-plus degree summer days. Hopper windows serve the same function for below-grade and utility spaces.
What’s covered under your warranty?
Every installation is covered in writing for 365 days by the Done Right Promise. If the window fails, the seal goes, or the hardware acts up within that period, we come back and fix it at no charge. No labor exclusion fine print. The manufacturer’s warranty on the window itself runs separately and varies by line.
Why Riverside Calls Meridian Windows and Doors
We’re part of the Garrison Partners family and have been operating to The Garrison Standard since 2009. That standard means something concrete: written pricing before work starts, a live person answering the phone around the clock, background-checked and uniformed technicians on every job, and a written 365-day guarantee on every installation. We are authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That range means we don’t have to steer you toward whatever happens to be in the warehouse.
The easiest way to get started is to call (831) 217-8612. You’ll talk to a person, not a voicemail tree. We’ll schedule a measurement, give you a written price, and if you decide to move forward, the crew shows up on the day we agreed to. That’s the whole offer, and it’s backed in writing.
Written by Elliot Vance, Owner at Meridian Windows and Doors Riverside, serving Riverside.
Six Reasons Homeowners Choose Meridian Windows and Doors Riverside
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.